■ Features(1) : PF valve
- The cutting process can be optimized just by setting up the PF valve to the target “material, shape and size”.
■ Features(2) : Cutting depth setting unit
- The blade descends horizontally. Tooling and dovetail grooving can be easily handled by adjusting a cutting end height.
■ Features(3) : Lever type insert clamp
- A foolproof lever type insert clamp is installed to the guide bracket.
■ Features(4) : Motor-driven Coolant pump
- A motor-driven centrifugal pump was introduced in this model, rather than a conventional gear pump. Cutting fluid can be used and cleaned regardless of whether the main motor is ON or OFF.
■ Features(5) : Vise mechanism
- Vise jaws are located on both the front and the rear sides of the blade in a well-balanced manner in order to properly feed and hold materials. This vise mechanism is capable of properly clamping small materials.
General-Purpose Band Saw Machine
Horizontal semi-automatic metal cutting band saw machine
|Cutting capacity (mm)||Round (Dia)||Φ 250|
|Rectangle (W x H)||300 x 250|
|Blade size (W x T x L) (mm)||27 x 0.9 x 3505|
|Blade speed (m/min)||22, 33, 45, 57, 67 (50Hz)|
|27, 40, 54, 68, 80 (60Hz)|
|Motors (kW)||Saw blade||2.2|
|Power requirement (kVA)||5|
|Stroke length (mm)||-|
|Tank capacity (L)||Hydraulic||20|
|Table height (mm)||700|
|Allowable load (Mass of work) (kg)||1500|
|Machine dimensions (W x L x H) (mm)||1742 x 1156 x 1540|
|Mass of machine (kg)||1000|
- Roller table